in Anything Eriba-related
Mon Jul 31, 2023 1:54 pm
by
monoboard
• | 359 Posts
Hi Folks I have an eriba 320 2015. Just noticed only today that the spout has a micro crack up it from where it joins on to the main tap body. Has anyone had this problem before & any recommendations for getting a new spout & I presume it just screws on. I don’t want to disturb it till I have a new one
there is big nut underneath to undo to take tap out oh & the wiring to undo, jubilee clip & pipe, refitting pipe may need cup of boiling hot water to soften. take photo. so can assess job is it leaking or just cosmetic
in Anything Eriba-related
Mon Jul 31, 2023 4:55 pm
by
monoboard
• | 359 Posts
I’m hoping I can just unscrew the spout by hand and just screw another one on but don’t really want to unscrew the old one till I have a new spout to screw on, it’s dripping from the crack just above where it screw on.
in Anything Eriba-related
Mon Jul 31, 2023 5:33 pm
by
eribaMotters
• | 5.537 Posts
Taps have changed over the years. Some models had a drop in ceramic type sink so the tap was mounted through the work surface. Later vans had a stainless steel sink with a simple cold only swivel tap coming out of the side of the sink. Move on to newer vans and we see work surface mounted taps that might be cold only or hot/cold mixers.
Colin
Forum Moderator. aka Oscar - Audi A3 1.5 petrol - oh dear me, I've gone to the darkish side and bought a Feeling after 4 Tourings