#1

Has anyone used Midland Motor Movers

in Anything Eriba-related Thu Jul 17, 2025 5:59 pm
by SOULBLUESMAN68 | 1.251 Posts

Hi everyone
Our Reich Comfort Motor Mover has given up the ghost on our Troll after 10 years excellent service. We have had it examined and a repair is possible but would cost over £400 with the part and the labour with no guarantee of how long it would last. We have been advised to spend that money on getting a brand new replacement.

Our servicer has put us on to a local chap they use to fit movers. He has just rung us to say that he deals in Powertouch not Reich, he has little experience of Eribas and thinks that the Powertouch ones don't fit Eribas easily, if at all. Also he would have to get a Reich from Midland Movers, and would not get it any cheaper than us. He has suggested that we contact them and get a price for them to fit a replacement one.

i want to ask if anyone has experience of Midland Motor Movers and if so would they recommend them.

Any help would be greatly appreciated as Kath and I are having to move our Troll by hand at the minute and we are getting too old for that..............!

Cheers
MikeT



Randa france likes this post!
Last edited Thu Jul 17, 2025 6:00 pm | Scroll up

#2

RE: Has anyone used Midland Motor Movers

in Anything Eriba-related Thu Jul 17, 2025 6:41 pm
by eribaMotters | 5.837 Posts

Mike, all I know is that they have a good reputation and are familiar with Eriba's.
Whoever you go with I'm guessing its best to stay with the same Reich as you would not need to replace the expensive brackets.

Colin


Forum Administrator aka Oscar - Audi A3 1.5 petrol - oh dear me, I've gone to the darkish side and bought a Feeling after 4 Tourings
SOULBLUESMAN68 likes this post!
Scroll up

#3

RE: Has anyone used Midland Motor Movers

in Anything Eriba-related Thu Jul 17, 2025 7:33 pm
by JohnE | 31 Posts

What's the fault with your Comfort mover, Mike?


SOULBLUESMAN68 likes this post!
Scroll up

#4

RE: Has anyone used Midland Motor Movers

in Anything Eriba-related Thu Jul 17, 2025 7:54 pm
by scouteralf | 136 Posts

there is a mobile service engineer in the lanc area he has a eriba and is advertising on facebook
mobile is 07482308020
worth a call


troll 530GT pushing Skoda Karoq (petrol)
SOULBLUESMAN68 likes this post!
Scroll up

#5

RE: Has anyone used Midland Motor Movers

in Anything Eriba-related Thu Jul 17, 2025 8:13 pm
by Randa france | 13.571 Posts

Mike. Midland Motor Movers comes highly recommended by many folk (we rely on Mrs R for moving our Troll) and the owner belongs to Eribafolk Facebook. Old age fade, his name escapes me (Richard Gorton?).................................
Randa


ERIBAFOLK POP UP EVERYWHERE 1999 Eriba Troll 530 pushing a VW Touran 2L TDi Match . 1995 Eriba Puck flying behind Ford Kuga 2L Titanium FORUM ADMINISTRATOR
SOULBLUESMAN68 likes this post!
Scroll up

#6

RE: Has anyone used Midland Motor Movers

in Anything Eriba-related Yesterday 11:55 am
by SOULBLUESMAN68 | 1.251 Posts

Hi John

When I was last using the mover at Strathclyde site there was a sudden loud ping and the door side motor mover wheel moved back a good half inch from the tyre and wouldn't move forward at all. The bathroom side was still moving........From then on we moved out Troll by hand.

We took it to our servicer yesterday. We left it with him and he rang us back in the afternoon. He had a look and said that a replacement part needed would be about £150 to order and then with labour and bits and bobs it would probably come to about £400. They couldn't do it now as they are snowed under with work. George was of the opinion that as the mover was nearly 10 years old we might be better spending that money towards a new one with a 5 year guarantee. They pass this work onto a mobile engineer they know who specialises in motor movers.

This engineer rang us last night. He is booked up until September but anyway specialises in Powertech (?) and we want another Reich. He could order us a Reich but he thinks we could get it as cheaply from Midland Motor Movers ourselves. He hasn't done much work on Eribas and said that, if he could do it eventually, he would be more expensive than Midland. He recommended that we speak with them.

I looked at their website last night and thought of upgrading to an automatic Easydriver Pro as Kath and I are not getting any younger and I don't think that she could handle turning the manual one far enough for it to engage on the tyre - I now don't find it easy anymore. It is expensive but it might be a necessary expense...............!!

Late last night I emailed them with some questions and am waiting for a reply. In fact I was just about to ring them but thought I would check the Forum first...

Thanks for your response
Mike


Scroll up

#7

RE: Has anyone used Midland Motor Movers

in Anything Eriba-related Yesterday 11:58 am
by SOULBLUESMAN68 | 1.251 Posts

Hi Alf
Thanks for the response.

Do you know his name - I don't do Facebook. This isn't the number of Paul who rang us yesterday. Does he say where he is based?

Cheers
Mike


Scroll up

#8

RE: Has anyone used Midland Motor Movers

in Anything Eriba-related Yesterday 1:27 pm
by Randa france | 13.571 Posts

Hi Mike. Just looked again and Midland Motor Movers is Richard Gorton and they are based in Aldridge

See this link:-

John E. HELP!

Randa


ERIBAFOLK POP UP EVERYWHERE 1999 Eriba Troll 530 pushing a VW Touran 2L TDi Match . 1995 Eriba Puck flying behind Ford Kuga 2L Titanium FORUM ADMINISTRATOR


SOULBLUESMAN68 likes this post!
Last edited Yesterday 1:30 pm | Scroll up

#9

RE: Has anyone used Midland Motor Movers

in Anything Eriba-related Yesterday 2:58 pm
by scouteralf | 136 Posts

hi, mike, found him advertising on facebook, name is tom covers lancashire but happy to travel a bit further

just took a picture of the side of his vehicle for his number, unfortunately the only clear enough to read was his number


troll 530GT pushing Skoda Karoq (petrol)
Scroll up

#10

RE: Has anyone used Midland Motor Movers

in Anything Eriba-related Yesterday 5:35 pm
by SOULBLUESMAN68 | 1.251 Posts

Thanks Alf
Mike


Scroll up

#11

RE: Has anyone used Midland Motor Movers

in Anything Eriba-related Yesterday 5:37 pm
by SOULBLUESMAN68 | 1.251 Posts

Thanks Randa
Mike


Randa france likes this post!
Scroll up

#12

RE: Has anyone used Midland Motor Movers

in Anything Eriba-related Yesterday 6:09 pm
by FINNWOODY | 143 Posts

Mike, Midland Motor Movers fitted a Reich mover to our 1997 Pan Duo T (Familia) a few years ago.We live on Notts/ Derbyshire border.He arrived on time and just got on with the job.I was and still am happy with his work.Recommended.


SOULBLUESMAN68 likes this post!
Scroll up

#13

RE: Has anyone used Midland Motor Movers

in Anything Eriba-related Yesterday 8:37 pm
by Richard | 16 Posts

Mike, As above. Midland Motor Movers fitted a Reich Easymover Pro 1.8 to our Triton 420 about four years ago during Lockdown. Fitter turned up punctually and exactly as arranged, cracked on with the work and completed the fitting neatly and efficiently. The mover works reliably and easily. Good job all round! Recommended.


SOULBLUESMAN68 and FINNWOODY like this post!
Scroll up

#14

RE: Has anyone used Midland Motor Movers

in Anything Eriba-related Yesterday 10:54 pm
by SOULBLUESMAN68 | 1.251 Posts

Thanks Richard and Finwoody
Mike


Scroll up


Visitors
2 Members and 24 Guests are online.

Board Statistics
The forum has 13208 topics and 109855 posts.



disconnected Forum-Chat Members online 2