in Improving your pride and joy and how to fix things
Mon Jul 04, 2022 9:30 am
by
Aaron Calder
• | 3.921 Posts
I've resurrected this thread to give an update as I've been amazed at the difference the overhaul has made.
Yesterday I towed for approximately 150 miles with none of the creaking and groaning that I'd become used to over the years. The caravan seemed to tow much more smoothly than before.
When I tried to uncouple at St Neots, I was a bit concerned when, having slackened off the ratchet I had to pull the red release lever quite firmly to get it to release.
I can only conclude that the worn seals in the stabiliser had seriously affected its performance and that replacing them has restored its original efficiency.
Forum Administrator 2003 Triton 420 and Audi A4 2.0Tfsi S-line SE Cabriolet
in Improving your pride and joy and how to fix things
Tue Jul 05, 2022 2:25 pm
by
Randa france
• | 13.892 Posts
As you know Brian, I had several bits drop out of mine during our recent trip so I'm going to have to bit the bullet and change them some time. So far, touch wood, so good. Randa
ERIBAFOLK POP UP EVERYWHERE 1999 Eriba Troll 530 pushing a VW Touran 2L TDi Match . FORUM ADMINISTRATOR
in Improving your pride and joy and how to fix things
Tue Jul 05, 2022 8:51 pm
by
Aaron Calder
• | 3.921 Posts
During today's 150 mile journey from St Neots to Howden we had to negotiate a few speed bumps and I realised from the silent way we went over them that I had become accustomed to thinking a sort of 'crunching', creaking noise was normal.
The improvement in the towing experience is very noticeable. Everything now feels 'right' somehow.
Forum Administrator 2003 Triton 420 and Audi A4 2.0Tfsi S-line SE Cabriolet
in Improving your pride and joy and how to fix things
Wed Jul 06, 2022 6:51 am
by
rambling robin (deleted)
If you want a quick touch up - and who wouldn't - then you'll find that Humbrol Gloss 20 is an almost perfect match for the older Alko dark red.
This looks like the perfect winter project. Just wondering if there are any known torque settings for the Allen headed bolts holding the hitch to the drawbar?
Rather genteel 2004 Troll 540GT called Matilda pushing a couple of old fogies.